Are you a DIY woodwork enthusiast? Are you looking for something to even out those rough edges of pieces of wood?
No need to worry anymore, we have included the best 8 inch jointer to go for. Not only 1, but we have also picked and reviewed the 5 best ones to give you greater choice!
Undoubtedly, the plethora of options available online can make your choice a difficult one. Even some big names don’t provide the precision and accuracy required to get the perfect cut. So, we have gone ahead and solved this problem.
Best 8 Inch Jointer 2021 – Say Hello to Straight and Smooth Wood Every Time
Even though there is the option to buy straight wood from the shops, for DIY projects, making such an investment is not a good option.
Therefore, it is a good choice to look for the perfect 8-inch jointer on the market to help you convert uneven wood into a flat service at an affordable price.
Wood Jointer | Weight | RPM | |
|---|---|---|---|
58.9lbs | 12000 RPM | ||
69lbs | 9000 RPM | ||
78.8lbs | 12000 RPM | ||
49lbs | 12000 RPM | ||
373lbs | 5500 RPM |
Starting with Wahuda Tools, their 8-inch wood jointer weighs 58.9 pounds and dimensions of 34x14x13 inches. It is black and made of cast iron/steel.
Unlike other jointers, it provides expert precision combined with innovative solutions. The cutter head blades are designed with a sharpness to cut edges that no other knife can offer.
Its sides are of a carbide insert that ensures smooth cuts and produces fewer shavings. Besides, I don’t have to work on keeping the blades sharp, as they are designed to stay sharp longer.
The question arises that, if by any chance it gets blunt, then how to remove the cutter head from an 8-inch jointer? The answer is, undo the insert then rotate it to the edge, and then tighten the insert back to its place.
Cool right! Unlike other traditional jointers, it is less noisy. So say no to noise pollution.
The material of these jointers is corrosion-resistant and fewer chances of scratching. The jointer has an aluminum fence that can tilt 90 and 135 degrees to gain maximum versatility. These jointers are competent to mill boards with stability and ease.
The jointer has a motor of 120V, which is powerful enough. In addition to that, 12000RPM makes a noise like the sound of a breeze.
This 8” jointer has a table of length 34 inches and can extend up to 51 inches, giving you ample space to work in comfort. It is perfect to go to job sites and small shops.
In short, everything is good and is one of the best 8 inche jointer at this price. However, I feel it can be more workable if the quality of the adjustment knobs is a bit better. They appear to be made from unreliable plastic.
- Hassle-free to adjust
- Unique cutter head
- Long-lasting sharp blades
- Easy to use
- Less noise
- Adjustment knobs of plastic
- The fence is made up of exuding aluminum
Vevor benchtop jointers weigh 69 pounds and a dimension size of 33.5×18.5×16.9 inches. This benchtop jointer comes with a heavy-duty stand made of steel which makes it stand stable while you’re working.
Due to its smooth & durable surface of the table, the benchtop reduces damage to the material. In case of a slippery grip, the head guard helps to avoid accidents.
Its hand-wheel is user-friendly which helps in adjusting the height of the cutter head. It also has a scale ruler which helps in precise cutting without error.
It has a 2-in-1 function that can be used by combining the planer and benchtop jointer in one unit. Likewise, lock the jointing tables and plan for precise cutting and efficiency.
Its steel blade is high-speed and is designed to plan weathered, worn, and rough wood into a smooth finish. It is used to plan bamboo, lining nylon, wood, etc. Its dust exhaust easily cleans up flying chips of wood to give you a clean working environment.
Its speed is 9000 RPM/min with 1500W power. The package includes a jointer benchtop, tool holder, dust adapter, protective sheet, wrench, 2 material board, 4-foot pads, and Allen screws each.
Talking about safety precautions, it is equipped with an over-current and power off electromagnetic switch. In short, it is less expensive which is good, but if you need more accurate cuts then it is not recommended.
- User friendly
- Inexpensive
- 2-in-1
- Comes with a heavy-duty stand
- Well equipped with safety measures
- Cuts not accurate
This benchtop jointer weighs 78.8 pounds and the size in dimension is 40x18x14 inches. Its spiral cutter head makes use of 16 HSS blades that provide the perfect finish of soft and hardwood.
It has a 10 amp motor that will rotate the cutter head to 12000 times/min. The table is spacious enough and measures 33 by 8” along with support arms that can extend to 51”. Which makes it more convenient to work with long pieces of wood.
The fence can be tilted up to 45 degrees to obtain angular cuts. It also has a blade guard to protect against injuries and accidents. This way, only a limited section is exposed of the cutter head while doing the jointer operation.
The package includes a dust port for cleaning purposes and 2 push blocks. It also comes with a 2-year warranty and a stock inventory of replacement parts.
In the end, I’m slightly disappointed with its motor which is under power and the blades are far apart
- Pocket friendly
- Fence of good quality and adjustable
- 2-year warranty
- The motor is not powerful
- Too much spacing between blades
Rikon 8” jointer is portable and weighs 49 pounds. Its size in dimension is 51x19x13 inches and its body is made of steel.
It has a helical style cutter head of 6 rows, including 16 carbides of 2 sides, along with 2 insert cutters. These features result in a super-cutting experience. It consists of a metal structure, an aluminum table, and an adjustable fence.
The fence can tilt from 90-45 degrees. The table extension aids in expanding the surface from 30 .5 inches to 51.5 inches for longer wood. It also has dust ports of 4 inch and 2.5 inches to clean up flying wood chips
To ensure safety it has 2 push blocks and a power on/off switch. However, I feel that setting up this machine is slightly frustrating. It can take hours.
- Portable
- Pocket friendly
- Good results
- Takes time to set up
The Shop Fox jointer comes with a mobile base that weighs up to 373 pounds and is CSA certified. The size in dimension is 25.5 x 72.5 x 42 inches.
It is built of solid cast iron, includes a magnetic switch, cast iron handwheels, a mobile base that is integrated. Its cutter head is 4 knife built which gives 25% extra cuts/minute. Resulting in smooth finishing.
It is capable of edge jointing, rabbeting, surface planning, and bevel cutting due to its adjustable 88 inch by 38-inch fence made of cast iron.
It has 4 straight and high-speed knives of steel which gives you better finishing in comparison to traditional 3 knife jointers. The cut depth is a maximum of 1/8 inches.
Its motor is 230V, single-phase, and 3HP. The size of the table is 9 x 72inches. It cuts 22000/min with a cutter head speed of 5500RPM. It also includes a 4 inches dust port to give maximum cleanup.
Along with that a pair of free push blocks for free. And the plus point is that it makes less noise. All is good by the end, but it is a bit expensive.
- Less noise
- High quality
- Easy to assemble
- Expensive
8 Inch Jointer Buyer’s Guide:
Oh, how tempting is it to go for the best 8-inch jointer that provides the most features? Or, isn’t the most priced one going to be the best of the lot?
Sadly, this misconception exists that either the one with the most features or the most highly-priced one is the best. If you look at the 8-inch jointer reviews, you will see this is not always the case.
Hence, you should look at several different features before making the final choice. So, keep an eye out for the following features before you decide which one to go for.
Power – How Efficient is it?
One of the first things to look out for is the power of the jointer. Yes, all the jointers run on electric power, but that does not mean at all that the power they exhibit is the same.
There are 3 parameters to check:
- Horsepower
- Amperage
- Speed
Generally, people make the mistake of only considering the horsepower and assuming that the higher the horsepower, the more efficient the machine. But, this is not the case. You need to keep amperage and speed both in mind while making the final decision.
Pro Tip: Anything around 1 HP is enough to be used around the house in most DIY projects. Therefore, you don’t need to go for higher HP if you are not going to be working professionally.
Built – How Long Will It Last?
It is not a hard and fast rule, but generally, the stronger and sturdier the model, the longer it is going to last you.
On the other hand, a very weak and fragile jointer is not going to last for long and is not going to be durable.
Cutting Depth and Bed Width – How Much can it Cut in One go?
Both these things are very important to check. You don’t want to be spending hours and hours on just making the board flat, would you?
The cutting depth is the amount of board it can easily remove in just one go. This is another very important measurement as jointers with a small cutting depth require going over the board again and again.
However, the ones with a deep cutting depth allow the worker to go over the board a few times and get done with it. Consequently, it means the number of passes that are required to result in a perfect, polished, and precise cut.
How wide can your jointer cut? As we are currently talking about the 8-inch jointer, it can cut boards as wide as 8” in one go. This is better than the normal 6-inch jointer. So, you can tackle professional projects with the 8” one too.
Portability – How Mobile is it?
When talking about jointers, see that you don’t go for very heavy ones. If they are too heavy, you will not be able to move them from one place to another and that can be an issue.
Pro Tip: If you think you are going to be moving it from place to place, keep an eye out for the weight. Moving a 5 kg jointer is going to be easier than moving a 50 kg one.
Knife Adjustments – How can You do it?
The number of knives and the ease with which you can adjust them matters a lot. Moreover, the basic jointers come with 2 knives while the high-quality ones have 4 knives in them.
Fence – Does it Have Your Back?
Generally, people think that the only role the fence plays is that it keeps the wood board down. Wrong! This is not the case at all.
Apart from this, the fence is also used to help cut the wood at different angles. For this, it is important to check whether the fence is adjustable or not.
Dust Collection System – How Strong is it?
Another thing to look out for is the dust collection system. Especially if you are using it at home or in the garage, you are going to be cleaning the mess up. So, why put yourself in trouble? Why not go for something that makes less mess?
Pro Tip: Go for jointers that have a dust collection bag attached with them. This will ensure that there is a minimum mess.
Maintenance and Usage Tips and Tricks
If you are a newbie, this is going to be a very important section for you. We are bringing some tips and tricks to help you use the jointer most safely and accurately.
- Firstly, you need to keep in mind all the necessary PPE equipment and wear the relevant at all times.
- NEVER wear loose clothing, jewelry, or other loose items
- Always check the guard twice before working
- Secondly, use a push stick wherever possible.
- Keep a check on your hands. Keep them as far behind as possible.
- Check the depth of cut and the sharpness of the knives before you start using them.
- Thirdly, never stand directly behind the jointer. It is important to stand at one side to avoid injury.
- The cutter head has to reach maximum speed to ensure a perfect cut.
Frequently Asked Questions
Conclusion
As you can see, when you go to buy the best 8 inch benchtop jointer, you don’t know which one is going to be the best and which is not. Therefore, we have reviewed the 5 markets best ones with the most affordable price and the best performance.
Furthermore, to make things easier, we have picked the top one. Our top pick today is by VEVOR. The jointer is one of the best 8 inch jointer for the money and will give you the performance you require.
