Is a loud annoying sound from your car and unpleasant fumes bothering you? It is time to have a look at the best muffler for 4 cylinders available. The right muffler for your vehicle will work in more than one way for your vehicle.
But, what good will it do? It will help you get rid of all the exhaust fumes that your car produces. This will increase your vehicle’s fuel efficiency as well as improve the engine’s performance.
An ideal muffler would give your vehicle an exhaust note which you desire. The choice is entirely yours. You can pick the loud ones or go with the soft mellow sound.
10 Best Muffler for 4 Cylinder
We give you a quick comparison of the best performing mufflers for 4 cylinders available:
You would like your car to give you a quiet ride? This muffler by Evil Energy is ideal for your vehicle. Installing this in your car will deliver a slight reverberating sound when you are speeding up.
But you can expect it to be relatively quiet when you are moving at a constant speed on the highway. It is achieved by using high-quality cotton, which has excellent sound absorption attributes.
Cotton, being a porous material, produces a deep, low-tone sound.
Installation is easy! You can get this muffler fixed in a few minutes. To install, you can either weld or use a seal clamp. Welding is recommended as they create a very strong joint. Alternatively, the U-bolt or clamp can also be used, but they cannot be used again.
Measure before buying: This muffler has a length of 14.8 inches. You must measure it before making your purchase. Otherwise, it will not fit in your car.
In addition to this, it is made of stainless steel which prevents it from getting rust quickly. Hence, it is a good and sturdy option. Furthermore, you need to keep the inlet and outlet size in mind too.
This muffler is built on a straight-through design. This enables a maximum of exhaust fumes to flow quickly from the outlet. Also, it increases the fuel efficiency of your vehicle.
Moreover, the muffler surface is polished giving it an aesthetic appearance. Also, the 2-inch inlet is universal. Thus, it can fit any car with an exhaust pipe of a diameter of 2 inches.
- Comes with a two-month warranty
- Aesthetic appearance
- The not very loud sound
- Universal size
- Reasonable price
- Does not include a silencer
You can use the DC Sports muffler on a variety of vehicles. It can be used with not just cars, but also with trucks. It includes a clamp system and adapters which would allow you to fit it in most of these vehicles. You can even use it with your Sedan!
In addition to this, it is made of stainless steel and has a polished exterior. Steel with its anti-corrosion properties makes these last for a long time. Moreover, the polish on the outer surface gives it a good look.
It is designed in such a way that it delivers greater power. This is achieved by decreasing the backpressure. As this goes down, it helps your vehicle in two ways: Firstly, the power increases which would make your vehicle go faster. So you don’t have to worry about those accelerating rides.
Secondly, the torque would also increase which would improve your vehicle’s capacity to make use of the horsepower. Thus, this improves the efficiency of your vehicle.
There is more! The design also gives an improved sound output as you turn on the ignition. The sound is deep and throaty when you are driving between medium and high revolutions per minute.
Moreover, the muffler has a resistant and durable finishing touch to make the design just perfect. These are available in various sizes so it will be easier for you to choose the right one for your car.
Furthermore, when you have decided to install it, you can right away get it done from any welding shop. You will not be required to make any modifications to your car’s factory settings.
- Makes your car more efficient
- You don’t have to make any changes to your car
- Different sizes available
- Good exterior appearance
- Some people might find the sound low
- You cannot install it yourself
Here is the chambered muffler to give your vehicle that deep sound which you are looking for.
The inlet and the outlet diameters are both 2.25 inches. Moreover, it is 19 inches long. Check your car’s exhaust pipe diameter and length before making a purchase.
It comprises two chambers. These would make your vehicle sound quieter as the exhaust gases travel through them. Yet, your exhaust pipe would deliver a certain aggressive sound that wouldn’t go unnoticed.
Furthermore, the chambers are welded with each other. This makes it sturdy and perfectly strong to handle the intense pressure of exhaust gases.
Looks Fab! It is made of stainless steel which is polished, giving it a shiny appearance. The stainless steel exterior makes it rustproof and gives it a long life span.
In addition to this, the exterior has been treated with a high-temperature metal finishing, making it more resistant to wear and tear. This also makes your muffler less prone to getting scratched.
The Thrush logo on the cover adds the final touch to make your muffler look good.
A drawback of this muffler is that it comes with a non-reversible design. This makes it less flexible when you are installing it on your vehicle.
- Good appearance
- Deep tone sound
- Value for money
- Trusted brand
- Might be too loud for some people
- Less flexibility on installation
This Flowmaster Fx is a straight-through muffler. The inlet is offset and the outlet is designed to be at the center of the muffler. There is a mounting bracket at the outlet which is welded to the end giving it more strength.
Furthermore, it is oval. It makes the muffler less prone to damage.
The straight-through design enables the exhaust gases to quickly flow out without facing much resistance. This will improve your vehicle’s efficiency. And it will also increase horsepower, allowing you to drive your car at high speeds.
It is made of stainless steel. Moreover, it is designed intricately to deliver the most unique echoing sound from your vehicle.
- Excellent quality
- Moderate sound
- Sturdy design
- Aesthetic appearance
- Does not have the typical Flowmaster sound
Your muffler needs to be replaced, but do you want to get the same sound and performance that your original factory-fitted muffler was giving you? Then this is the one you should choose.
This muffler is entirely made of stainless steel. Unlike other options available, which have some parts aluminized; this has all parts made of stainless steel. Hence, there is no chance that any part of this muffler will catch rust.
Furthermore, there is a drainage system installed inside the muffler. It prevents moisture from getting accumulated within the muffler, thus further keeping it safe from corrosion. Therefore, this one has a long life span and is highly durable.
The best part about this muffler is the style of its bolts, hangers, and other components – these are designed in such a way that they will resemble the muffler that your car originally came fitted with.
Due to this, you will not have to make any changes to your car and you can simply install this one. Installation is so easy that you will not even need to get it welded. It is designed to simply fit with bolts.
The tubes inside are louvered in such a way that they deliver a much quieter sound compared to other options available. This is because most of the mufflers employ straight tubes which keep them noisier.
On the other hand, this one will keep your car’s sound the way it was when it left the factory.
This will survive long! In addition to this, the tubes inside are constructed and joined mechanically. This makes it easy for them to adjust to changes in temperature. The tubes can expand or contract freely with any temperature variation. Thus, as a result of this, there is a minimum distortion created.
It is also well protected against ruptures that are usually caused by backfires. The heads are designed specifically to make them break-resistant. All the design features and specifications deliver superior performance as they are tested for quality.
- Original factory-style design
- Strong design
- Makes your vehicle quieter
- Anti distortion
- Easy to use
- High price compared to other options
- It will not give you a rumbling sound
This Borla muffler is made of premium quality stainless steel which gives it the best anti-corrosion properties. The sturdy design and oval shape make it a perfect choice for not just your local car but also for trucks. Its distinct shape makes it compact and less likely to be damaged
It has a reversible design which makes installation easier.
It gives your vehicle a growling sound that is not very loud. The sound is controlled by Continuous Filament Fiber (CFF) packed in the tube. The filament fiber does a very good job of absorbing the sound. Also, exhaust fumes can flow out of the system really quickly.
- Available in different sizes
- Includes warranty
- The low sound produced compared to other options available
- The premium quality fiber used
- Offers flexibility in installing
- A bit expensive
- It will need to be polished before you fix it
Looking for a muffler that employs technology at its best? It is this turbo muffler that comprises large tubes. Moreover, these tubes are equipped with a flowing design that is exclusive to these Dynomax mufflers.
These tubes give more space for the exhaust gases to flow out quickly. This, in turn, brings the backpressure down and increases your vehicle’s performance. A reduction in backpressure enables your vehicle to utilize the available horsepower more effectively.
In addition to improved performance, it will help you in getting rid of turbulence when driving.
It manages sound by making use of fiberglass as the packing material in the muffler tubes. Fiberglass does an excellent job of absorbing the sound. Hence, your vehicle will deliver a soft tone, which is not too harsh for the ears.
It improves the flow of exhaust gases to as much as 700 standard cubic feet per minute (SCFM). The quicker the exhaust gases escape your vehicle, the better is your vehicle’s performance.
Thus, this turbo muffler plays a dual role. Not only does it control the unwanted loud noise, but it also makes your vehicle more efficient.
It comes with a warranty that covers any sound and performance-related issues for three months. You are further protected with a lifetime warranty subject to the conditions mentioned. Have a look at your warranty specifications before ordering your turbo muffler.
It uses aluminized steel for all the parts. Furthermore, these mufflers are welded by using high-definition arc welding technology. This gives the muffler internal strength and makes it resistant to temperature changes.
Thus, they do not get adversely affected by expansion and contraction caused by any temperature variations. Also, it makes them last for a longer time. These are perfect for trucks due to the tubes built with large diameters.
- Warranty included
- Reasonably priced
- Reduces turbulence
- Improves vehicle performance
- Creates a soft sound
- Makes your vehicle more efficient
- Does not use stainless steel
Are you a fan of that Thrush sound? If yes, then this is what you are looking for.
Built on the typical turbo design, it will not just deliver the sound you are looking for but will also give you full value for money. In addition to this, it is built on the principle of reducing the backpressure which greatly improves your engine’s performance.
Furthermore, it has an aluminized double outer coating to prevent it from getting rusty. The double coating wrapped around makes it more durable and long-lasting. Moreover, it comprises a side center design built on the triple flow principle. This is what creates the signature Thrush sound in your vehicle.
Also, the reversible feature gives you complete flexibility at the time of installation. You can also make changes in the bushings according to your vehicle’s requirements. To prevent leakage, lock heads are used to give a complete seal.
- Reasonably priced
- Offers a lot of flexibility at the time of
- Improves engine performance
- Prevents leakage
- Might be too loud for some people
- Does not have stainless steel covering
This muffler by Flowmaster has both its interior and exterior made of stainless steel. The core is filled with premium quality sound absorbent. This will give your vehicle a deep sound that is different from the famous chambered Flowmaster mufflers.
In addition to this, the diameter of the inlet is large enough to let exhaust gases pass through with pressure. The straight-through design does not pose much resistance to the flow of these gases, hence improving your car’s engine performance.
Moreover, it comes with a reversible design. This makes installation easy and gives you the flexibility to make variations according to your vehicle’s requirements.
All the parts in the core are welded together, thus, making the design internally strong. Also, you will see the FlowFX logo on the cover which would further add to the beauty of your muffler. It has a universal design and can fit in most vehicles.
- Strong and sturdy
- Improves engine performance
- Flexible installation
- Deep sound
- It sounds different from the Flow master’s signature sound
This Flowmaster muffler comes with a chambered design. It comprises two chambers. This creates an internal sound that is loud enough to be noticed.
When the exhaust gases pass through this muffler, the resulting resonance gives out an aggressive sound. This is very similar to the typical Flowmaster exhaust tone that the brand is famous for.
In addition to this, the muffler is equipped with a technology known as “Delta Flow.” This increases the engine’s performance considerably. First, it increases the vehicle’s horsepower, which allows you to accelerate your vehicle to high-speed levels.
Second, it increases the torque which enables your vehicle to use the available horsepower more effectively. This further increases your car’s fuel efficiency.
- Easy to install
- Improves fuel efficiency
- Increased engine performance
- A bit pricey
4 Cylinder Muffler Buyers’ Guide
We have described the top muffler for 4 cylinders available in detail. But if you are still confused about which one to pick, read through our buyer’s guide which would make it easier for you to make the right decision.
Type of Design
Mufflers come in three designs.
- Chambered mufflers
- Straight through or glass pack mufflers
- Turbo mufflers
Each design impacts your vehicle differently. The performance and the sound produced by your vehicle is directly influenced by the type of muffler that you choose.
As the name suggests, these mufflers have their inner space divided into sections, also known as chambers by using walls.
How does it work? These chambers are positioned in a specific way such that the sound waves interfere and interact with each other. And when this happens, these waves reduce one another’s sound effect, and as a result, reduce the sound created in the end.
Some brands also include additional inserts that line these chambers. This gives a further reduction in the sound created.
What does it sound like? Chambered mufflers make your vehicle sound quieter. And the arrangement of these chambers creates a certain exhaust note which is not very loud but gives a muscle roar to your vehicle.
These mufflers consist of a single tube that runs from the inlet to the outlet. It is usually a straight tube, though some brands have introduced an angular tube as well.
How does it work? This tube is packed with a perforated porous material to absorb sound. Some of the common material used includes fiberglass, steel wool, or premium quality cotton. These materials have excellent sound-absorbing properties and therefore, they reduce the noise that your vehicle will make.
Furthermore, the exterior of the tube is then covered with stainless steel which further reduces the sound.
What does it sound like? These straight-through mufflers give you a great choice. They can give you a loud enough sound to get noticed on the road. Some of these can make a raucous sound that can be too loud for your ears.
An advantage of these is that they improve your engine’s performance considerably. Since the exhaust is a straight pipe, the gases flow out quickly without facing much resistance. This greatly increases your vehicle’s performance and also makes your car efficient.
These are designed as a fusion of the two types of mufflers discussed above.
How does it work? They have the inside tubes twisted into an S shape which works as chambers or portions. In addition to this, the tube is packed with fiberglass or other porous materials just like the straight-through mufflers.
What does it sound like? The twisted tubes resist the flow of exhaust gases from the outlet. Thus, it takes longer for them to flow out, and in this process, their sound energy is reduced considerably. Therefore, turbo mufflers give you a quieter sound.
Which One Does it Better?
Type of Muffler
Good at noise reduction
Chambered and turbo
Improves vehicle performance
The Best Material
This is one of the most important considerations when evaluating a muffler. This is because it undergoes immense amounts of exposure and is subject to too much wear and tear.
In addition to this, it needs to be built strong enough to handle the intense pressure with which the exhaust gases flow through. Therefore, it should be made up of strong and durable material so it can last for a long time.
There are two types of material used in making mufflers.
- Aluminized Steel
- Stainless Steel
First, it gives a shiny and gleaming appearance making the exterior look aesthetically appealing.
Second, it has anti-corrosion properties. This gives it a long life span and makes it resistant to all types of weather conditions.
Third, it is sturdy and strong enough to bear the pressure of the exhaust gases passing through the pipe.
But it is not durable enough. It gets scratched after use for some time. And once the outer coating gets scratched, the steel inside gets exposed which makes it prone to corrosion.
The Right Size
When purchasing a muffler for your car, it is very important to know the size specifications of your car. You would not want to buy one and then not be able to use it simply because it will not fit in the space available in your car.
When checking the size of your muffler, consider the following checkpoints:
Check your car’s exhaust system – single or dual? A car with a single exhaust will be fitted with a muffler with one inlet whereas a dual exhaust car will be fitted with a muffler with two inlets.
Check the diameter of the exhaust pipe: The diameter of the exhaust pipe should be the same as the muffler’s inlet pipe diameter. Otherwise, the muffler would not fit.
Check the length of the muffler: You need to check how much space is available in your car for a muffler. Pick the one which is the same length as that of your car’s exhaust pipe.
Frequently Asked Questions
After reviewing the best muffler for 4 cylinders, our pick is the Walker 53602 Quiet Flow Muffler. The reason for choosing this is that it gives you a muffler that is entirely designed using OE solutions. From bolts to hangers and even the welds – these are all built on the OE style.
This will give you an exhaust solution that is closest to your vehicle’s factory-style muffler. It gives you the most precise fit.
Another reason for choosing this is that it will keep your car’s internal tubes free of moisture. The moisture control feature would keep your car’s tubes and pipes clear from all the condensed liquids.
Last but not the least, it gives your car the ideal quiet sound which is typical of OE.