Gleaming and Gorgeous-the Ford F150 is the ultimate choice of truck lovers ever since its release in 1975. One look at the drivers of these mighty vehicles is sufficient to understand how proud they are of their stunning Ford F150!

The length, build, and beasty wheels give the F150 an unmatchable look. And, as for the performance, you should see the beauty gliding through the uneven rocky terrains! However, one thing that troubles all drivers and passengers alike is the height of the doors from the ground. (Well, you’re exceptional if you’re adequately tall.)

Climbing in the truck requires a good jump, and getting out is more like sliding. This particular thing can become a major problem if the person entering or exiting is elderly, child, or too short. Man, the struggle is real!

Best Running Boards for F150

Well, if you are a Ford F150 owner, we know, you have been through it and are probably searching for a suitable solution. Yes, we know the net lacks information when it comes to aftermarket automotive accessories.

Anyhow, you are in serious luck because we have dug into the depths and found a glorious solution; the running boards!

Below, we have reviewed the top-rated and best running boards for F150. There is also an insightful and detailed guide to help you through the complete purchasing process. Read more!

Top 10 Running Boards for F150

Running Boards
Load Capacity
4 inch
8 inch
6 inch
5 inch
4 inch
6 inch
6 inch
6 inch
6 inch
5 inch
APS iBoard Running Boards 4in Black

APS iBoard Running Boards 4in Black

  • It is 4-inches wide.
  • The running board has a load capacity of 300-lbs.
  • It consists of aircraft-grade aluminum.
  • It is UV and corrosion-resistant.

The innovative iBoard is a product of a reputable automotive accessory company, known as APS. It is run by an automotive-passionate family with numerous brands. So, they are reliable and trustworthy, folks!

When designing these boards, the APS company strived to create something that was not bulky like the Nerf bars or over-styled like the electric running boards. The APS iBoard is a traditional-style running board that has a patented low-profile design.

It has a 4-inches width, which makes it neither too wide, nor too narrow. The moderate width makes it ideal for all people to easily climb in the Ford F150. It does not hinder the driving performance like other bulky boards.

The APS iBoard has a matte black powder-coated finish. Once installed, these running boards will give your stunning Ford F150 a contemporary yet bold outlook.

Each running board has a corrugated surface, and a non-slip pad covers the entire length. Hence, strengthening one’s grip on the running board. All individuals can climb in and out of the truck easily without slipping.

APS has tested its boards to ensure the delivery of quality. For grip, they have conducted the rubber friction co-efficient test. So, when they claim a secure non-slip step, then they certainly mean it!

They have also carried out the load stress test. Each of these APS iBoard running boards can hold a maximum of 300-lbs, which is a lot. It is probably more than two adults standing on the board without creating a single dent!

Perhaps, this strength comes from the high-quality build of these APS running boards. The company has used aircraft-grade aluminum for the build. APS starts the making of the APS iBoard will a huge block of aluminum.

Then, it goes through a lot of processing (milled, de-burred, and surface treated). Even the end caps of these APS iBoard consists of aluminum, which means zero plastic!

So, you can drive F150 with these running boards anywhere easily. The strong boards can withstand all damages. It is also UV and corrosion-resistant. Hence, these will last quite a long.

These APS iBoard running boards are also easy to install. The boards come along with mounting brackets and a DIY hardware kit. So, anyone can install it easily within 30 to 45-minutes.

You can use these iBoard running boards with Ford F150 (2015-2020), SuperCrew Cab, F250 F350 Super Duty (2017-2020), and Crew Cab.

  • Wide and thin
  • Sturdy profile
  • UV-resistant
  • Easy to install
  • Non-slip grip
  • Good compatibility
  • Inconsistent customer service
AMP Research PowerStep Electric Boards

AMP Research PowerStep Electric Boards

  • It features an integrated LED light system.
  • It is a broad running board.
  • It has a load capacity of 600 lbs.
  • It comes with a 5-year warranty.

AMP Research dedicates its existence to finding the best solutions for automotive enthusiasts. The company enriches the plain running boards with its innovative insight into the whole concept of running boards.

How so? Well, let’s check out one of their most popular and best electric running boards of all times, i.e., AMP Research 76151-01A PowerStep. The latter is a black-colored durable running board with a low and slim profile.

Dimensionally, it measures 81 x 13 x 8 inches. Thus, it is an admirably broad step, allowing users to stand upon it if they wish so.

The coolest part of this running board is the fact that it is electric-powered. Hence, as soon as you open the door, the installed running board will automatically extend to help you climb on.

When you close the door, it hides safely out of sight. Hence, for users who feel that running boards ruin the overall look of their Ford, this may be the right pick! We highly recommend these to them!

But even the extended running board, its stylish and sleek built seems to complement the vehicle. If you have mixed views or are using a running board for the first time, then you’re probably going to love it!

APS research crafted this masterpiece from stainless steel and aluminum. Technically, the entire running board comprises high-strength aluminum alloy with a military-spec finish for corrosion resistance.

Hence, whether the sun is shining aggressively or the clouds are storming, the APS Research power step has got your back. Since it can withstand almost all weather conditions, you will find it along your side for quite a long time.

Plus, these require minimal maintenance. So, that’s a relief too! You need not invest precious time in this! Quite frankly, it landed here in this list of best running boards for F150, all due to its impressive load capacity! It beats the ordinary and promises a capacity that goes the extra mile.

And this, in turn, adds to its durability. The collected data, as well as company-provided data, confirms that this running board supports up to 600 lbs. Naturally, its capabilities are screaming: bring it on!

What’s more, APS research also provides a five-year-long warranty. You can always get back to the company in case of any complaints (which is highly unlikely!).

  • Comes with a 5-year limited warranty
  • Durable
  • Weatherproof
  • Electric-powered
  • Impressive load capacity
  • Slightly difficult installation
Raptor Series 6 inch

Raptor Series 6 inch

  • It has a load capacity of up to 400 lbs.
  • The running boards are lightweight yet sturdy.
  • It offers a width of about 6-inches.

Raptor Series is its automotive accessories manufacturing journey back in 2004. Since then, the company has been combining quality, craftsmanship, and customer loyalty to produce an array of automotive accessories.

The Raptor running boards F150 are one of these accessories that have gained massive appreciation from F150 owners. And this appreciation involves every aspect, including the looks, performance, durability, and all other aspects.

Looking at these running boards, the Raptor Series 1703-0366BT boards resemble the entry-level products in the market. It has a fine rectangular structure with a black textured powder coat finish and angled end caps.

So, when installed on F150, the running boards give your truck a more classic appearance. Instead of adding those rugged edges, the Raptor Series running boards simply enhance the stock outlook of the Ford F150.

In width, the Raptor Series running boards are 6-inches that is quite broad! The massiveness allows everyone to step and use the board easily. Hence, making the entrance and exit convenient.

On these boards, there are integrated anti-slip pads that prevent tumbling and fumbling. This particular feature helps elders and children who have a weaker grip on things. So, if you have such people at home, this is a bonus!

The Raptor Series running boards consist of high-grade aluminum. It has a pure aluminum composition that makes it sturdy and strong. Each board is powerful enough to withstand a total weight of 400-lbs!

When getting in the truck, you can also stand on the step. There is no need to fear causing damage to the running boards or treat them with immense care.

Each of these Raptor running boards has a weight of 32-pounds that is quite light for a 6-inches board. It makes installation easy. The boards also come with brackets and hardware for installing them yourself.

However, users have reported that the included hardware is of poor quality. It breaks upon installation. Hence, you have to hunt for replacement parts. Apart from this, you can use these running boards with several Ford models. These include F2509 F180, F350, and F331.

  • Aesthetic looks
  • Wide step
  • Sturdy
  • Lightweight design
  • Extensive compatibility
  • Installation problems
Tyger Auto TG-RS2F40118 Riser

Tyger Auto TG-RS2F40118 Riser

  • It comes with a 5-year warranty.
  • It’s available in two different variants in terms of width.
  • DIY installation.

As a reputable name in the industry, Tyger Auto strives to surprise the automotive industry. Yes. That’s correct; the company strives to surprise and not satisfy.

Perhaps, it is this particular approach of the brand that has led it into the limelight. The goal is to bring in something new (of course, for your convenience!) instead of replicating something that’s already in the market.

Tyger Auto TG RS2f40118 Riser is an excellent example of that. The latter is a sleek and sturdy running board, ready to help your cab stand out amongst all! Plus, it offers a decent load capacity, ranging from 220 lbs – 400 lbs.

Tyger Auto seems to realize your sensitivity about your vehicle’s looks. And so, the company offers its masterpiece in two different colors. These include:

So, you can go with one that best suits your Ford F150. Note that the difference between the variants is only of the color and not the material.

Both of these feature steel alloy, which offers impressive durability and resistance to discoloration. Structurally, these running boards are slightly triangulated, which in turn brings increased ground clearance.

At the extreme ends, you will find rectangular end caps. These bring about a more defined look. This, coupled with the aggressive looks of the bracket, will make your F150 appear the beast that it truly happens to be.

Also, apart from the steel body, the running boards feature non-slip side steps. Their rubber nature makes access to your cab convenient and safe in all weather conditions. It is available in two sizes, including 4-inches and 5-inches. So, if the width bothers you most, there you go!

The variant with a width of 4-inches will comparatively be less prominent on the vehicle, while the one with a width of 5-inches will be more prominent. For the installation process, you won’t need to spend double the product price on the installation solely. Instead, you can do it by yourself!

There’s no need to drill holes or invest too much mental and physical effort. Just bolt it on using the pre-drilled holes at the lower side. What’s more, it comes with a five-year-long warranty! Do you see what that means?

Even if you can’t come to trust the durability of the product, then this extensive warranty gives you all the right reasons to do so! It ensures that even if something goes wrong, you will have the company standing at your back.

  • Comes with a 5-year-long warranty
  • Easy Installation
  • Non-slip properties
  • Rust Resistant
  • Durable
  • Sleek looks
  • Available in two colors
  • Available in two sizes
  • Average load capacity
APS Premium 4in iBoard Running Boards

APS Premium 4in iBoard Running Boards

  • It is 4-inches wide.
  • The APS iBoard is a traditional-style running board.
  • Each board can withstand a weight of 300-lbs.
  • It is UV and corrosion-resistant.

We discussed the APS running boards previously, and here is another one! Two of APS products have made it to our best running boards for F150. Well, now, you can have a better idea of the brand’s outstanding quality!

The APS Premium 4-in iBoard running board is one of the new generation running board varieties released by the brand recently. Unlike the traditional boards, these ones are flat and contemporary-looking.

It has a rectangular and slim structure that gives it a cleaner exterior. The running boards have a matte silver finished surface. Hence, augmenting the beauty of your Ford F150. Please note, if you are on the hunt for those dangerous off-road looks, then these are not idealistic.

These APS running boards have a 4-inches width. It is neither too huge nor too narrow. Hence, making it appropriate in all aspects.

Usually, running boards with too much width cause trouble in driving. However, this one is convenient. It has a non-slip top on the surface, which makes its entrance and exit easier too.

As for the build, these APS iBoard premium running boards consist of the same aircraft-grade aluminum. It is sturdy enough to handle a weight of 300-lbs. You can stand on it easily. The boards do not even bend, let alone get damaged. These are also UV and corrosion-resistant. So, you can drive your modified Ford F150 anywhere anytime!

Weather and outdoor elements will not affect their build. If it gets dirty after off-road driving, all you require is a water hose to make it new again. You certainly don’t have to use any dedicated oils or cleaners.

The APS iBoard premium running boards are quite easy to install too. Beginners, intermediate, experts-all can install these boards in only 60-minutes. All the brackets, hardware, and instructions are present in the package to make things easier. However, the 43-pounds heavyweight build might make installation a little difficult.

Nonetheless, the product is certainly value-for-money. These running boards are compatible with Ford F150, F250, F350, F450, and F550.

  • Finer looks
  • Offers comfort
  • Sturdy build
  • UV resistant
  • Good load capacity
  • Extensive compatibility
  • Heavyweight
YITAMOTOR 6 inches Running Boards

YITAMOTOR 6 inches Running Boards

  • It comes with a one-year warranty.
  • It supports up to 450 lbs.
  • It offers a width of 6-inches.
  • It is available in two colors.
  • DIY Installation.

As one of the biggest and renowned retailers of automotive accessories in the USA, Yitamotor has a reputation for manufacturing top-notch quality running boards. The brand not only ensures that the offered product condenses its excellence in all terms. Along with that, they also aim to meet the customer’s definition of perfection. Perhaps, this explains the massive appreciation they receive.

Yitamotor 6-inches running board is also amongst the brand’s masterpieces. And naturally, an ideal candidate as the best running board for F150.

Manufactured from stainless steel and premium quality polymers, this six-inches wide running board from Yitamotor is tougher than you think. Its external plastic built may have you doubt that, but the performance will surely prove it otherwise!

Its corrosion resistance makes it immune to any possible damages when exposed to harsh weather conditions, such as misty weather or stormy rains. Even when passengers step on with wet shoes, you wouldn’t have a thing to fret over. Plus, the stainless steel structure keeps issues like discolorations, development of fissures, or cracks a safe distance away.

Apart from its plastic structure, the running board features slip-resistant properties. The area of the running board that comes in contact with the shoe surface maintains the right degree of friction between the two surfaces. Thus, it keeps either of the two from losing contact.

When it comes to load capacity, Yitamotor running boards do fairly well. This six-inches variant supports up to 450 lbs on each side.

To save mechanic costs, Yitamotor ensured that it has a complete DIY installation process. It comes with an easy bolt-on installation that eradicates the need for any drilling or technical procedures. For your ease, it comes with installation instructions and all necessary mounting hardware as well.

As a cherry on top of this phenomenal purchase, Yitamotor provides a hassle-free warranty of one complete year! Every penny that you spend on it is not only going to be worth it but also safe!

  • Non-slip properties
  • Good load capacity
  • Corrosion resistance
  • Easy to install
  • Available in two colors
  • May develop scratches easily
Ionic Factory Style 2015-2019 Ford F150

Ionic Factory Style 2015-2019 Ford F150

  • The running boards are 6-inches wide.
  • Each board can hold up to 350-lbs weight.
  • It comprises premium quality aluminum.
  • It is corrosion-resistant and durable.

If you wish to replace your stock running boards, then we strongly recommend the Ionic Factory Style Fits 2015-2019 Ford F150 running boards. The Ionic running boards have a rectangular structure that stretches from one wheel to another. Its end has a circular edge that gives it a humble and blended look.

These wheel-to-wheel running boards for Ford 150 look quite similar to the stock ones. However, it is six inches wide, which is simply great! You have a massive step to put your foot on comfortably. Elders, adults, and the children-every individual can use this Ionic Factory Style Fits Ford 150 running boards easily.

The 6-inches width also forms a great barrier between the shooting debris and the vehicle’s body as you rush through the rocky terrains. Hence, protecting it from any damages. These running boards consist of premium-quality aluminum that makes them sturdy enough to resist all the damage too.

Its corrosion-resistant nature keeps the running boards in their original state for a long. You certainly won’t have to change them after a few months of use.

On the surface, these running boards have an anti-slip pad that offers you immense confidence when stepping in and out of the car. You won’t wobble or tumble, which moves more fluid. And, each board can hold up to 350-lbs of weight too! So, you can even stand on it.

As for installation, these Ionic Factory Style Fits 2015-2019 Ford F150 are quite easy to install. The running boards come with hardware and installation tools. Anyone can fix the running boards easily. You won’t have to go to the nearest shop or seek professional assistance.

In a nutshell, the Ionic Factory Style running boards are a great stock replacement option that blends into the Ford F150’s outlook. It won’t give those beasty looks or enhance the current one. However, it does a pretty decent performance than stock running boards.

  • Sturdy build
  • Good load capacity
  • Easy installation
  • Wide and comfortable
  • Corrosion-resistant
  • No upgrade in looks
APS Drop Steps Boards Rocker Slider

APS Drop Steps Boards Rocker Slider

  • It is 6-inches wide.
  • Each running board can hold up to 300-lbs.
  • These are side step running board that consists of aluminum.
  • The running boards come with a 5-years warranty.

The APS Drop Steps Running Boards Rocker Slider are not any regular running boards. Unlike the usual traditional style, these running boards possess a side-step style design. It stretches between both the side wheels of the Ford F150, with steps under the doors. This particular construction allows you to climb in and out of the truck very easily.

Certainly, a traditional running board has its advantages. However, these step-style boards make the movement more definite and secure. You can step onto more confidently than regular running boards.

Also, each APS Rocker Slider Drop Step is 6-inches wide. The massive width allows one to place the foot on the board fully before entering the vehicle. An adult foot will not be hanging halfway out of the board when using these drop steps.

These running boards are quite strong with good load capacity. You can easily apply 300 to 350-lbs worth of weight on these boards. In the given range, the drop steps will not bend or break.

So, you can stand or jump on these boards. And, still, stay stress-free about the product’s condition. Similar to other products, this one comprises top-notch quality aluminum. Hence, making it sturdy and damage-resistant.

When driving in rocky terrain, these running boards do not only protect themselves but also the truck’s body. The 6-inches width blocks the debris and dirt from hitting the body and causing damage.

These APS Rocker Slider running boards are corrosion resistant too. Thus, they can drive the Ford F150 anywhere anytime!

As for installation, these running boards come with all the mounting hardware and comprehensive instructions. It might take some time to identify things. However, once identified, installing it yourself is not a challenge at all!

Well, some users have reported some concerns regarding the assembly of the running boards.

Well, some users have reported some concerns regarding the assembly of the running boards. There are three bolts required for the installation. However, the product comes with only two bolts that might trouble in the future.

  • Integrated design
  • Sturdy build
  • Fuel-efficient
  • Good load capacity
  • Easy to install
  • Comes with a 5-years warranty
  • Assembly concerns
Auto Dynasty Black Side Step Nerf Bar

Auto Dynasty Black Side Step Nerf Bar

  • It is 6-inches wide.
  • The running boards can hold up to 500lbs.
  • It weighs 44-pounds.
  • Each board is rust-resistant.

Perhaps, one of the best black running boards for F150 are these 6-inches running boards by Auto Dynasty. These boards do not classify as side step bars or Nerf bar running boards. Instead, these are premium quality traditional style running boards. You won’t regret getting them. Why? Let’s find it together!

Auto Dynasty is a reputable and reliable brand that has manufactured numerous successful automotive accessories. These running boards are one example of the innovation used by the brand.

Each running board has a stunning black powder-coated exterior that goes well with the Ford F150. Well, it will be better to state that it looks gorgeous with the truck!

The edgy corners and straight rectangular profile give it a unique appearance. Plus, it is 6-inches wide that making it prominent against the gleaming body of the Ford F150. Besides the outlook, the 6-inches running boards helps in making entrance and exit easier. The wide footstep allows you to climb in and out without trouble.

These Auto Dynasty running boards consist of three different materials, including:

All these materials make the running boards strong and powerful. Each of these boards can hold up to 500lbs, which is way too much!

Usually, boards have a potential of 300 to 400-lbs. However, these running boards break this norm with such great capacity. These Auto Dynasty running boards give you true confidence as these will not dent or bend.

There are ABS Plastic covered anti-slip step pads on the running boards that further enhance your grip. Everyone can step onto these boards without trouble.

You can take your Ford F150 anywhere with these running boards. Being rust-resistant, the boards will not corrode or lose their original state. However, the angled structure might trap water that can be unpleasant.

These 6-inches running boards by Auto Dynasty come with mounting brackets and require no drilling. Hence, you can install them easily within an hour. These are compatible with Ford 150 Super Crew Cab and Ford F250/F350 Super Crew Cab.

  • Integrated design
  • Great looks
  • Wide and comfortable
  • Sturdy build
  • Excellent load capacity
  • Easy to install
  • Traps water
PM PERFORMOTOR Chrome Oval Board Nerf Bar

PM PERFORMOTOR Chrome Oval Board Nerf Bar

  • It supports up to 500 lbs on each side.
  • The running board has a width of about 5-inches.
  • It is weatherproof.

If you seek something genuinely heavy-duty that’s vocal about your vehicle’s toughness, well, then this might be it for you!

Crafted from stainless steel, this 5-inches chrome oval running board side step Nerf Bar offers a rather sleek and shiny exterior. When mounted on your Ford F150, these will look undeniably grand.

Being a Nerf Bar, this exceptional variant features oval tubing. Here, it is important to note that Nerf bars have a slightly different structure and purpose compared to running boards. The latter has a flatter and wider surface, while a Nerf bar has a tubular structure with an oval or circular outlook.

Hence it differs from most others in this list of best running boards for F150. But again, it is important to remember that their primary purpose remains the same, i.e., to help the passenger climb up.

And so, we cannot claim the two to be entirely different kinds of automotive accessories. If you must differ, then let us perceive them as alternatives! In terms of width, it measures about five inches. Thus, providing ample room for foot, easing down the movement of passengers.

Plus, either side supports up to 500 lbs., which also makes it quite sturdy and capable. About two adults can stand simultaneously on each side, and the Nerf bar wouldn’t get a scratch!

PM Performotor crafted this masterwork with stainless steel, which provides it with impressive strength. Further, its chrome covering or polishing adds to its durability and provides it with corrosion-resistant properties.

It would mean that users shall not furrow a brow when the grey clouds cover the sky. Your accessories will remain safe!

The central rubber padding on the Nerf Bar ensures that there’s sufficient friction between the surface that comes in contact (i.e., the sole of your shoe) at all times. So, that checks anti-slip properties on our list.

Moving on, it is super easy to install. With a DIY-based installation mechanism, you can easily mount the supporting brackets and bars onto the vehicle.

  • Easy installation
  • Affordable
  • Sturdy
  • Anti-slip properties
  • Prevents corrosion
  • Impressive load capacity
  • Heavyweight

Running Boards for F150 Buyer’s Guide:

Above, we have evaluated some of the ideal running boards for F150. However, there are still plenty of options available in the market. Below, we have articulated some of the essential-most factors to consider when purchasing running boards.

Advantages of Running Boards for Ford F150

For many, the addition of running boards to their stunning Ford F150 might seem like any other aftermarket upgrade. However, running boards come with a plethora of benefits that make this upgrade more of a necessity in the Ford F150.

Here are some fundamental advantages accompanying the running boards in Ford F150:

Aesthetic Looks

Black Running Board for F150

One thing that all Ford F150 owners seek in their truck’s beauty is the off-road, aggressive looks. There is no denying that the original design is absolutely gorgeous and attractive.

However, it is too clean and fine for the nature of the truck. (You know what we mean!) Almost every Ford F150 owner has to make some mods to the vehicle for achieving those rough looks.

Suspensions, Grille Guards, Covers-none of these mods is sufficient to bring the beasty appearance all on its own. Well, except for the running boards. The addition of some sturdy and edgy running boards to your Ford F150 can be a game-changer!

Easier Entrance & Exit

Perhaps, the biggest struggle of using a Ford F150 is entering and exiting the vehicle. The heightened body of the truck positions the doorway up from the ground.

To get in, one has to jump up. And, to get out, you will have to slide instead of stepping out. Well, intensify this struggle by ten if you have a short height!

Adding running boards is specifically useful for the elderly and children. So, adding running boards to the Ford F150 eases this problem a lot. These are present halfway from the door and ground that provide you a boost. Hence, making the entrance and exit easier.

Increased Protection

When driving off-road or in rocky terrain, the debris shoots up and hits the vehicle’s body. Thus, damaging the body paint.

If driving off-road is your passion and the Ford F150 is the love of your life, then this particular thing can be really painful. Compromising one of these is certainly not an option!

In this scenario, a running board can save you trouble by protecting the truck body. These sidebars create a barrier between the debris and the vehicle. Hence, changing its direction as it shoots up.

More Cleanliness

Running boards have a non-slip grip on the top that wipes the dirt from the shoes as you enter the car. Hence, keeping the interior of the vehicle clean.

Types of Running Boards

The aftermarket accessories for Ford F150 do not have a diversity of running board types. However, there are four fundamental types from which you can choose. Each type serves a specific purpose, has pros and cons. Let’s evaluate in detail!

Traditional Aftermarket Running Boards

wheel to wheel running boards for ford f150

These are regular, wide, and flat steps present under the truck doors. As traditional running boards, these offer the safest non-slip grip.

Usually, these are available in a variety of widths, ranging from 3-inches to 6-inches. All the wider running boards are more efficient in protecting the truck body. However, extraordinarily wider ones can make driving a little challenging.

Some traditional running boards also come with integrated LED lights that light up when the door is open. Hence, allowing you to find the step better in dark or low-lit environments.

Power-Operated Retractable Running Boards

These are the advanced version of the traditional ones. These have the same properties with one luxury addition that is automation.

The power-operated retractable running board folds out automatically when the door opens. And, it folds in on its own once the door closes. Hence, overcoming the challenges of driving with wider running boards. Some versions also come with an LED-lightning system.

Nerf Bars

These Nerf Bars have an oval and circular structure that resembles more pipes than steps. Hence, giving the truck a more off-road touch.

Nerf bars stretch below the doors to provide a step in Ford F150. They also feature a non-slip grip.

Side Steps

Unlike running boards, the side steps are simple steps. Each step is below the door with a non-slip grip. Side steps are also useful for making an entrance into the rear part of the Ford F150 easier.

Things to Consider

It may as well come as a surprise to you, but the plain running boards have their complexities and technicalities. On the outside, it may not seem like it, but shopping for them can get a bit hectic in every sense of the word.

But we’re here to ease the process for you! Even if you don’t consider yourself an expert, it’s perfectly alright for you to get into the depths right at this moment. We have put forth everything for you in the simplest way possible. And we truly hope these assessment aspects help you get a running board according to your needs.

Construction Material

Chrome Running Ford F150 Board

The matter with cars is that they ought to withstand a lot of mechanical loads. Not only do cars deal with the constant hassle and mechanical wear on the road, but it also deals with people stepping in and people stepping out now and then, especially when the car has a bigger capacity. Of course, F150’s stand on the front line when we talk about bigger capacity and intensive usage.

For that very reason, you need to opt for a running board that’s tough, sturdy, and ready for all situations. Be it thumping boots or pointed sharp heels. It should be able to withstand all.

Currently, the market offers you two types of running boards in terms of materials:

Amongst these, metal ones such as aluminum and stainless steel are the most durable ones of all. Having higher strength, they are more durable and relatively scratch-resistant.

On the contrary, the non-metal ones, i.e., the plastic ones, are more prone to wear and tear upon intensive usage. Commonly used plastic materials used for manufacturing running boards include ABS materials. However, they work fine for average usage.

Padding Material

The padding material of steps is technically a sub-aspect of construction. But the reason we mention it separately is because it is a dominant factor with a significant impact.

If you consider the base material and not the padding material, you may end up regretting your pick. That’s because if these wear out before the base material does, your F150 is going to lose its smooth and polished looks!

Imagine tattered steps paired with your spotless vehicle. Awful. No?

For that very reason, you ought to select it carefully. Your two options in this regard are:

Amongst these, plastic is comparatively less durable. Rubber, with its soft yet sturdy nature, has a flexible nature. Thus, it is capable of withstanding all sorts of weather conditions and loads.


6 inch running board

Although the length of the running board usually depends on the vehicle’s model, width is something that you may choose from. There are running boards with a wider width, and there are running boards with a narrower width.

The width of the running boards does not only determine its functionality. It also affects the looks of the vehicle. So, you will need to see which of these best suits your needs.

Load Capacity

Load capacity, also known as weight capacity, is the amount of burden that a running board can handle. Usually, manufacturers specify a narrow range so that the buyer may decide easily.

Note that the higher the weight capacity, the more capable it is. Your options will most likely range from 300lbs – 550 lbs.


Well, once you have every other aspect sorted, you will have an idea about how much this can cost you overall. By the rule of thumb, the better the specifications, the greater the amount you will have to pay.

Thus, we advise you to shortlist your priority features and needs, including the brand name. And pick the models accordingly. If the best of the best is what you truly want, then you will need to ignore the price tag.

Brand Name

Before you read ahead, know that brand name is not a requirement or a set criterion for getting the best running board possible. At times, even newer names bring you the quality that stands unrivaled.

However, opting for reputable names gives one the advantage of making a safe purchase. Plus, established names usually provide a warranty with their products, which is also a perk of trusting established names.

Frequently Asked Questions

How to lower running boards on Ford F150?

The stock or even mod running boards on Ford F150 are difficult to alter all on your own. These running boards get secured in place with bolts and screws firmly. Hence, doing it yourself won’t be possible.

Take your Ford F150 to the nearest truck shop. They will have all the appropriate tools and equipment. These people would either add spacers or shift the position of the running boards.

How to install running boards on Ford F150?

The installation process of running boards on Ford F150 varies from model to model. However, generally, we can sum up the installation process in the following five steps:

  • Step 1: Find the two threaded holes in the rocker panel towards the front side. Once you’ve found it, install the bracket using hex bolts, lock washers, and washers. Tighten the bolts appropriately.
  • Step 2: Next, find two more holes along the length. You will find this pair towards the center of the lower side of the vehicle. Mount a bracket there.
  • Step 3: Move on to the last pair of holes towards the end on the lower side of the vehicle and install the mounting bracket using a wire nut. Tighten the bolts appropriately
  • Step 4: Now place the running board on the bracket and make sure it is aligned well.
  • Step 5: Once done, tighten all the screws and bolts and ensure that the running boards will hold their position. Repeat the procedure for the other side.
How to remove running boards on F150?

The removal of the running boards on F150 depends on the particular model or variant. If you are removing the stock running boards, then examine the mechanism first.

Usually, there are five or more bolts on either side of the running board. Simple, remove these bolts, and the running board will come out. In case the bolts are too tight, use a soldering gun to heat these up. The heating will cause it to become loose and come out.

Who makes iconic running boards?

Iconic Running Boards are brought about by a very dedicated company, i.e., Iconic Accessories. The brand strives to bring about top-notch quality automotive accessories and components to equip vehicle owners with the very best. The brand surely made it into our runner-up lists!


Whether you’ve been looking for traditional-style running boards, automatic running boards, or Nerf bars, we hope you’ve found your ideal pick by now. This complete list of best running boards for F150 brings together all your best options together and so it is highly likely that you may now have trouble deciding which works best for you.

In case of such confusion, we advise you to reconsider your priority list and decide accordingly. If that still doesn’t work, then go with our favorite, i.e., YITAMOTOR 6 inches Running Boards. With an appropriate load capacity of about 450 lbs, a width of about 6-inches, and a year-long warranty, we believe it’s an all-rounder! The final decision lies unto you, of course! Good luck!


Leave a Reply

Your email address will not be published. Required fields are marked *