Tired of having that ugly long stock antenna on your car? All the short antennas you got ruined the reception? Forget all your worries because we have reviewed the 10 best short antenna for Tundra that are top-rated and preferred by many around the world.

These antennas are made by considering the demands of every car owner. A short size, good reception, quality material, strength, and much more. So, read through our article to find your perfect match.

Comparing 10 Best Short Antenna for Tundra – Give Your Car a Style

Written below is a table that gives you all the major comparisons between the top 10 short antennas for Tundra to help you with your selection.

6 3/4th inches
6 3/4th inches
4 inches
4.9 inches
4 inches
7 inches
7 inches
2 inches
5.4 inches
4.8 inches
AntennaMastsRus The Original

AntennaMastsRus The Original

  • Made of stainless steel material
  • Has a copper core
  • Has an EPDM rubber covering
  • Has a sturdy shape

A short antenna that not only looks cooler in comparison to a long one but also gives great reception.

Let’s start with the material of the antenna: Unlike the typical antennas available in the market that are made with brass material threading that’s soft and doesn’t provide the strength an antenna requires, this one is made with 304 stainless steel threading.

This connects the antenna to your truck in a perfect manner. Unlike, weak and fragile threading that would make your antennas snap and you’ll end up with a broken base. The 304 stainless steel threading, specially made in Wisconsin would guarantee you a secure connection.

Furthermore, it is formulated from a special rubber, specifically known as EPDM rubber. It can withhold pressure and stay uprooted while your vehicle is moving. And it can withstand a temperature as high as 257-degree Fahrenheit.

The manufacturers have put years of work into perfecting the quality that would provide the durability that antennas lacked.

But how good is it at its work? As we know an antenna’s basic work is to receive radio reception. Surprisingly, this antenna is as good at reception as it is with other aspects such as durability and strength.

For this purpose, it has a copper core that is highly conductive and can achieve perfect reception, regardless of its height. Most short-length antennas are just used as decoration for the vehicle. However, this one does what it’s meant to do. So, only the length is getting shorter, not the reception.

What is this small size I’m talking about? Along with keeping all the functional qualities in mind, the manufacturers shortened the size of the antenna to 6 ¾ inches.

Isn’t that great? A short antenna, black in color. That is perfect to give a little personality to your tundra. Moreover, it’s car wash-proof.

Yes, you read that right! Most antennas are not able to survive the car washes at all. They cannot withstand the pressure and snap and break easily. Even the factory ones. But this antenna, with its efficient and strong materials and design, is not damaged at all.

So, the next time you’re at a car wash, you won’t have to worry about your antenna breaking off. It frees your mind of that worry too. Not to mention, it is really simple to install too. Just take a wrench to pull out your old factory antenna and twist this one in, tightly. That’s all you need to do.

After all the efforts made by the manufacturers, they have come out with an antenna that exceeds the expectations. In working, reliability, durability, and quality. And these are not mere claims, they have tested their products as such.

  • Short in size
  • Car wash-proof
  • High-strength
  • Can withstand high temperature
  • Rubber construction
  • Conductive material
  • Easy to install
  • Tried and tested
  • The reception might not be that good
TrunkNets Inc6 3 4 Antenna

TrunkNets Inc6 3 4 Antenna

  • Has a great design
  • Made of a durable material
  • Compatible with most models

An antenna you want to go for when you want factory-like reception, but with the looks.

How is it better than the others? Firstly, this TrunkNets antenna is 6 ¾ in height. This makes it at least five times smaller than the factory antenna your car comes with. Not only those, but this size is also smaller than most of the models and brands of antenna that are available out there in the market.

But what about the reception? When it comes to reception, the antennas that are short in length are what people wouldn’t normally go for. As it’s said, the longer antennas don’t look so cool on your car, but they give better reception. Oppositely, the short antennas are used for when you want looks, but their reception is little to nothing.

However, the manufacturers guarantee that this one is going to give good reception, plus serves as the looks for your car. Moreover, it is black in color and hence goes perfectly with all colors, so you don’t need to worry about the color feeling off.

That’s not all: This antenna is compatible with almost all the models of the Toyota Tundra, from 2007 to 2020.

One thing to keep in mind! Although the FM station reception of this antenna is the same as your factory antennas, the AM station reception is not as good during drives in the countryside.

  • Small in size
  • Easy to install
  • Good reception
  • Elegant looking
  • Black in color
  • Available for almost all models
  • AM reception may not be good
  • Isn’t car wash-proof
Maxracing Short Aluminum Antenna

Maxracing Short Aluminum Antenna

  • 7073 aluminum is used
  • Doesn’t affect satellite features
  • Doesn’t require wiring or tools
  • Has a strong and powerful material

An antenna perfect for replacing your stock antenna with when you want to enhance the looks of your car.

What is the benefit of aluminum material? Specifically, 7073 aluminum material is used in the manufacturing of this antenna. It provides your antenna with strength and durability.

Moreover, it keeps your antenna from any scratches and chipping. Its black finish would not fade over time because it is anodized. This is due to the corrosion and weather-resistant features. It gives your car a cooler and elegant look for a long time.

And that’s just part of the story: It also provides a great reception, of both AM and FM channels. So, you don’t have to give a second thought to changing your unpleasant factory antennas. What if I tell you that you can get factory-like reception at a considerably smaller size?

Wouldn’t that be great? This Maxracing antenna is just 4 inches in size and provides the same reception as 33-inch long antennas do, at less than 1/4th of their size. And it doesn’t affect Bluetooth, GPS, and On-Star either.

Additionally, it is very lightweight. Thus, it won’t be really hard to carry and handle.

As if that wasn’t enough! The threaded mounting that is present at the base makes it easy to install. All you need to do is take the old factory antenna out and directly bolt this one in. Wiring or tools aren’t required in the process. It takes less than a minute to fit it in.

So, its use is really convenient: Furthermore, it is securely packed to make sure no harm is done to the product from the inside or the outside. You would receive the product in its best shape. This short, stubby antenna for the Toyota tundra fits all the models of the car from 1999 to the latest 2020 model.

Hence, if you want a perfect replacement for your old, long and ugly, OEM antennas, the Max Racing aluminum antenna is the solution for you. However, its main purpose is to enhance the appearance of the car. So, keep that in consideration when buying.

  • Made from aluminum
  • Weather-resistant
  • Corrosion-resistant
  • Short in size
  • Lightweight
  • Easy to install
  • Reliable packaging
  • Good-looking
  • Reception may not be really strong
KEYO1E 4.9 AM FM Radio

KEYO1E 4.9 AM FM Radio

  • Has a built-in microchip
  • Doesn’t affect satellite features
  • Has a stainless steel screw base

A Tundra replacement antenna with great performance and sleek design. Give your car a new look.

Let’s start with the size of this antenna: As long antennas are not a very good look on cars, the KEYO1E Company designed one that is only 4.9 inches in size and with a sleek and elegant design. Also, it is black in color that goes with any car color.

It is a perfect replacement for your stock antenna as it performs better in reception than other antennas available out there.

You must be curious how: Allow me to tell you, This stylish antenna has a built-in microchip inside of it that works for signal enhancement and increases the reception and coverage comprehensively.

This microchip technology is not available in other short antennas which is why they are not as good at reception as the longer ones. But this one provides strong radio FM/AM signals and without affecting the Bluetooth, Navigation, On-Star, GPS, or other features of your vehicle. So, put your worries aside.

Let’s move on to the material, shall we? Along with the rest of the unique properties of this product, the material is ABS and PVC. This material has anti-abrasion properties which means that it will not chip and get scratched easily, and it’s durable. It also has a very distinctive injection design.

Moreover, this material protects the antenna from the effects of weather. Be it snow, rain, dust, wind, sunlight, etc. Not to mention, the inside of it is made from pure copper that is very conductive and aids in the receiving of signals, which is what makes this antenna more special than the others.

Still, want more? Good thing, because I’m not done yet: The installing procedure is also very easy. In fact, I don’t even need to call it a procedure as all you need to do is unscrew the old antenna and screw the new one into place. No need to take out your tools or any wiring. It is just done by a simple movement of the hand. That, too, in less than a minute.

It is because of the high-strength threading of 304 stainless steel, even strong wind pressure wouldn’t be able to break the base apart. So, forget the troubles of your antennas breaking during a car wash, or while parking in the garage.

Additionally, it is suitable for more car models, pickups, SUVs, sedan cars, and even motorcycles. Thus, if you want a sturdy, good-looking, and good reception, antenna with weather-resistant qualities, then get your hands on this one.

  • ABC and PVC material
  • Weather-resistant
  • Strong and sturdy structure
  • Lightweight
  • Conductive copper core
  • Signal enhancement
  • Strong signal reception
  • Great design
  • Suitable for many types of vehicles
  • It May is not long-lasting
RONIN FACTORY Short 4 Antenna

RONIN FACTORY Short 4 Antenna

  • Has an aluminum billet construction
  • Has a thread-locking compound
  • Doesn’t affect satellite features

The antenna has an anti-theft feature that fits many models and is safe for car washes.

Want to know about the material? This antenna is composed of a billet construction, which is a military-grade solid aluminum. This makes it super tough and strong, and thus it won’t break or even budge under pressure. Forget about all those ugly antennas that break while you’re parking your car in the garage.

Not only that, but it’s also car wash safe, and hence you won’t have to worry about it snapping in two the next time you are at the car wash place. You won’t even have to get out and take the antenna out.

Moreover, with the help of anodization, a clean finish is provided on the outside which doesn’t fade or chip over time. It stays fresh even after a long time of use.

What do I mean by anti-theft feature? With the threading feature that makes it really easy to screw it in, the antenna has a thread-locking compound that comes pre-applied. In other words, that means that as soon as screwed in, the anti-theft compound starts to set in and locks the antenna tightly.

This keeps anyone from picking your new antenna and it stays safe.

Additionally, the antenna comes with the required tools so you won’t have to buy anything more. The installation requires less than 5 minutes and doesn’t need any adapter. You can fit it in, directly.

That’s not all: Its size is only 4 inches, whereas the weight is only 0.51 pounds. It’s extremely lightweight and small in size, with a modern and sleek design that catches everyone’s eyes.

This can also fit a lot of different models of cars. To list a few, Toyota tundra, Cruiser trucks, Tacoma, and also the Nissan titan 2019+. And on the other hand, unlike many short antennas, it would not affect the Bluetooth, XM, satellite services, etc. on your vehicle.

However, you might see some difference in reception if you live somewhere in the countryside, with fewer towers and bad signals. Last but not least, they also have a return policy. So, in case you are unsatisfied with any of the products, you can return them hassle-free.

  • Easy to install
  • Short sized
  • Military-grade construction
  • Sturdy and strong
  • Won’t fade and rust over time
  • Car wash safe
  • Modern design
  • No affect to Bluetooth, satellite, and XM
  • Return policy available
  • Slight difference in reception
Rydonair Toyota Tundra Antenna

Rydonair Toyota Tundra Antenna

  • Has a brass stud
  • Carbon fiber column
  • Has a rubber jacket
  • Threaded from top to bottom

An antenna that would be a perfect replacement for your Toyota Tundra, with its stylish looks and reception.

How is the reception? Comparatively, this antenna is better at reception than other antennas that are cheap and claim good reception, and even the metal antennas that come with your car. It is designed for the FM or AM bands.

After installing, not only can you receive the signals from your own city, but also receive the out-of-city channels well. And without affecting the Bluetooth and XM compatibility of your vehicle.

But what’s the size of the antenna? Considerably smaller in size than the regular 31-inch antennas, this Rydonair one is only 7 inches long. Along with that, it’s super stylish and looks great on cars because of its design and its black color finish.

You may be wondering about the material: Firstly, this antenna has an aluminum base that provides good strength, better than the plastic antennas. It won’t snap and break off like the rest of the antennas do.

Secondly, it has a rubber jacket of premium quality all over it, and hence, it keeps the antenna safe from extreme weather conditions and increases its flexibility and durability of it.

Thirdly, to make it anti-corrosive and to increase the signal transmission to its optimum value, its stud is made of brass material. On the base, the antenna has a carbon fiber column that holds onto the mount and gives a stylish look as well.

But wait, there’s more! We all know car washes are considered graveyards for the antennas, but not this one. It can easily survive years of car wash, as claimed by the manufacturers.

Furthermore, the installation process is really easy. At most, it takes a couple of minutes and all the tools needed in the installation are given along with the package of the antenna. All you need to do is drop the antenna into its hole in your car, and screw it in, as it is threaded from up to the bottom, all the way down.

It also may look like it’s too small at first, but it fits right in. This antenna is suitable for all the Toyota tundra models, from 2000 to 2020.

  • Weather-resistant
  • Good FM/AM reception
  • Aluminum base
  • Great strength
  • Carbon fiber base
  • Easy to install
  • Great design
  • Short in size
  • Corrosion-resistant
  • Has a brass stud
  • It May does not last too long
VOFONO 7 Inch Antenna

VOFONO 7 Inch Antenna

  • Has a copper screw
  • Copper interface
  • Rubber surround
  • Has a spiral pattern

An antenna with a spiral design that is flexible and great at reception.

What is the size of the antenna? If you are one that goes for looks, then you would want a smaller size as it looks really classy. Lucky for you, this stylish antenna is only 7 inches long which is way smaller than the factory antennas that your car comes with.

However, the reception stays the same as the factory antenna which is unique in such a short height.

How does it receive signals so well? The core of this antenna is entirely made of copper, with a copper screw and a copper interface. It is not a secret that copper is a highly conductive material. Its conduction is 40% better than the aluminum material and 85% better than metals.

Thus, it conducts better signals than the antennas made of either material.

And that’s just part of the story: The copper core of this antenna is covered with a rubber surround that is wear-resistant and hence won’t fade or chip over time. This also protects the antenna from the harsh effects of weather and doesn’t impair its functioning.

Moreover, it gives an elastic finish to it, so the original strength remains, but a little flexibility helps against hard wind pressure. Not only does the rubber protect it from the atmosphere, but it also protects it during car washes, thus making it car wash proof.

Undoubtedly, one of the most annoying things about antennas is having them snap from the base during washes or taking out and reinstalling them every time.

This brings me to my next point: When you want to change something as minor as an antenna, you are looking for an easy-to-install feature. Well, this one gives you just that. No special tools or methods are required in the installation. You only need a couple of minutes when you can unscrew the old antenna and securely screw this new one in, while just using your hands.

Furthermore, its design is really unique. Unlike the regular ones, this has a spiral pattern to it, which gives a really cool look to your car.

What’s better than looks and work at the same time? So, if you want a great design and small size without any difference in reception, this is one for you. It fits almost all the models Toyota Tundra and Tacoma.

  • Copper core
  • Flexible material
  • Car wash proof
  • Short in size
  • Easy to install
  • Great reception
  • Good-looking
  • The base may be too small
CravenSpeed Stubby Jr Antenna

CravenSpeed Stubby Jr Antenna

  • Made of Billet aluminum material
  • Has a powder coating
  • Has a textured bottom

If you want to improve the look of your car, this antenna works as a great replacement for factory antennas.

Let’s start with the material: Its material is billet aluminum. It is a heavy-duty material and provides great strength and solidity to the antenna. Moreover, it is black in color. It also has a nice texture and powder-coating. This ensures that the color of the antenna won’t fade over time, and won’t easily chip or break either.

Along with that, it has a corrosion-resistant feature, thus, your antenna will also stay protected from the effects of the weather. Such as rain, snow, etc.

How small could the antenna be in size? Let me describe exactly how small it is!

Unlike every other short antenna, this one is only 2 inches in size. Hard to believe, right? But it’s true. To help you get rid of those 30+ inches long antennas, the CravenSpeed company came up with the smallest-sized sturdy antenna. Gone are the days when your antenna would get stuck in the garage door during parking.

However, it is also very easy to install, without the help of any tools, wires, adapters, whatsoever. All you need to use is your hand. Unscrew the stock antenna from your car and screw this stubby jr. antenna in. It literally just takes you a few seconds!

Let’s not forget about the reception: Great radio reception is guaranteed. As many customers themselves have reported getting more channels on their AM and FM radio.

Furthermore, it has a long-lasting life. It can withstand car washes along with the weather conditions, so you are not going to have to spend more money on antennas any time soon.

From its design to its building and coating, everything is authentically done in the USA. So, this stubby junior antenna would be a great enhancement to your Toyota Tundra and Tacoma. If this meets your expectations, then make your purchase now.

  • Only 2 inches in size
  • Easy to install
  • Corrosion-resistant
  • Won’t fade or chip over time
  • Good-looking
  • Long-lasting
  • Made in the USA
  • Reception may not be good.
ONE250 Bullet Style Antenna

ONE250 Bullet Style Antenna

  • Has a 50 caliber bullet shape
  • Has a copper construction
  • Made of billet aluminum

Want a bullet radio antenna for Toyota tundra? This one is what you are searching for.

Why did it get the name bullet? Because of its unique shape and style that makes It look like a bullet, this antenna has come to be known as a bullet antenna. With a length of 5.4 inches, it has the exact dimensions of a real 50 caliber bullet. It enhances the look of your car and gives it a great personality.

However, it is small in size, but the reception is good. You won’t have to think twice about not getting the same reception when you replace your stock antenna with this stylish one.

How strong is the construction? High-quality copper and T-6061 billet aluminum are used in the construction. The copper part of the antenna provides the conductivity that is needed to receive the radio signals.

Whereas, the billet aluminum makes it really sturdy and hard to stop it from breakage. Thus, it’s going to stand its guard against conditions such as high wind pressure.

Not only that, but this antenna is really easy to install too! It has a simple screw-on design that does not require any tools. It only takes a couple of minutes tops.

Moreover, to make that it fits in your vehicle properly, it comes with 6 different sizes of stud bolts. This way you can check which one would be the perfect match and use it. As a result, the antenna would sit in its place firmly and won’t move around and become loose.

Without a doubt, the manufacturers guarantee that this antenna can fit any model of your Toyota Tundra.

I’m not done yet: Furthermore, what you are going to receive, along with your antenna are 2 plastic rings. So, it isn’t really a bad deal if you are looking to change the look of your car with something that doesn’t affect the reception too.

  • Real bullet shape
  • Good-looking
  • Short in size
  • Easy to install
  • Comes with 6 adapters
  • 2 plastic rings present
  • Fits all models of Toyota tundra
  • Color may fade over time
  • Reception may not be too good
Aftid 4.8 AM FM Radio

Aftid 4.8 AM FM Radio

  • Has a built-in printed circuit board
  • Has a copper core
  • ABS body material

Are you looking for a long-range car radio antenna, but the one that also looks good and is small in size?

This one might be the one for you! With the new technology of a built-in printed circuit board that enhances the reading of FM and AM signals and gives you more channels than ever before with clear quality.

Along with that, it also has a copper core, which is a highly conductive material. Thus, the reception you get with this antenna is unmatched. But without any impact on the satellite services. For instance, XM, GPS, On-Star, etc.

Experience the radio like never before! Moreover, its design is very unique and good-looking. With the size being only 4.8 inches, it greatly enhances the look of your car. It helps you give your car a fashion statement.

Not just that, but its materials are also of premium quality. Such as the ABS material of the body and the plastic spray surface.

The ABS material provides sturdiness and strength. Whereas, the plastic spray treatment on the surface protects the insides of the antenna from the weather condition. Gives it a little flexibility to help it withstand pressure, keeps it from corrosion, temperatures as high as 245-degree Fahrenheit.

Worrying about how to install? The antenna has a very easy-to-install method. All you need to do is screw the new one in, in place of the old one. No tools are required in this process. It can just be done with a simple hand movement. Equipped with an O-ring, you can make the company logo, that is afraid, face straight forward.

This modern antenna can fit almost all the models of Toyota Tundra, along with the really old ones such as 1999 as well.

As if that wasn’t enough! The company provides a 30-day money-back policy for this product. You can use it and drive around your neighborhood, get the taste of it. In case you feel unsatisfied, you can get all your money back.

So, what’s better than a risk-free purchase? You have got nothing to lose, so try your luck out with this.

  • ABS material
  • Copper core
  • Printed circuit board
  • Unmatched reception
  • Short in size
  • Easy to install
  • Good-looking
  • Corrosion-free
  • Can withstand weather conditions
  • Good-looking
  • 30-day money-back policy
  • Needs to be removed before the car wash

Buyer’s Guide:

Best Short Antenna for Tundra

The search to find the best-rated short antennas for Tundra might be a difficult one, as there are many different options available in the market that claim to be the best.

Did the reviews leave you confused? Well, you don’t have to worry because, after detailed research about all these top-rated Toyota tundra antenna replacement products, we have created an elaborate guide to help you to find your perfect pick.

Keep reading to find out all things you need to keep in consideration when buying the perfect short antenna for your tundra.

Good Reception – Is it Possible With a Short Size?

It is always said that short antennas are just better looking than longer ones. If you want a good reception, then stick to the stock antennas.

But how much does a short antenna affect reception? Many brands that make the antenna short in size make it with an inbuilt chip or a circuit board. This goes the extra mile to enhance the quality of the reception. Furthermore, they use materials such as copper, which is highly conducive to increasing the conductivity of signals.

These are the attempts that are made in order to bring the reception level of the shorter antennas up to par with the longer ones. Thus, when searching for an antenna, look for its composition and what gives it a good reception, as the company claims.

Strength – What Materials are the Best?

Antennas come in many different materials. Stainless steel, aluminum, plastic, rubber, etc. All of these materials have somewhat different properties.

Let us tell you what makes an ideal material: No doubt the antenna should be sturdy and strong enough to withstand tough conditions. But a little bit of flexibility and elasticity is also necessary to make sure that it doesn’t snap in two after the application of a little pressure.

Furthermore, the material should also be able to protect its inside. Like the effects of rain, snow, high temperature, humidity, corrosion, etc.

Considering all these things, the best material for the antenna would be a covering protecting the copper core inside. The copper core would enhance the reception. Whereas the rubber jacket or outer covering would keep the antenna sturdy and intact.

Do You Really Need a Car Wash Proof Antenna?

You must’ve had one incident in your life where you went to the car wash and forgot to take out the antenna. If you do, then you also must remember the regret you felt when it snapped from its base due to the pressure.

The goal is to avoid that: Hence, it is important that you find the antenna that guarantees car wash safe.

Easy Installation – You Don’t Want Any Complexities

There are many options available that are very easy to install. You don’t even have to use any sort of tools or wiring. Although there are some that require a wrench and some that require adapters, you don’t have to choose from them.

Preferred would be the easy-to-install ones that only require to be screwed in with a simple movement of the hand.

Base – Should Match with Your Vehicle’s Model

Whether it needs to be screwed in or not, you have to make sure that the antenna you are getting matches with the base of the antenna port of your car. Many antennas are specifically designed for particular models so make sure you look into that before buying.

You can also get an adapter that would make it possible for an antenna with a different base to fit in a different port of your car.

Design – After all Looks Matter a Great Deal

Bullet Radio Antenna for Toyota Tundra

The point of buying a short antenna is to give your car a stylish and cooler look. Short antennas themselves do look really good on cars. But there are also ones that are available in different shapes.

So, as long as your antenna is good at reception and the rest of the mentioned qualities, you can go for any design that you find good or you think would look the best on your car.

Frequently Asked Questions

Q. Is a longer antenna better?

What makes a long antenna better is its range. But in fact, the size doesn’t matter that much. What is more important is that the length of your antenna matches the frequency of your radio, to get the optimal and perfect radio performance.

Q. Do antenna amplifiers work?

Just like how audio amplifiers make a weak noise sound louder, in a similar way, the antenna amplifiers strengthen the weak signals enough to create better sounds and broadcasting.

Q. What metal is the best for antennas?

The best material for car antennas has to be copper because of its properties. It is strong, yet malleable, and it conducts better than other metals do.

Q. What happens if you take the antenna off your car?

If you take the antenna off your car then it would be equivalent to turning off the radio. It won’t mess up anything else.


Have you been looking for the Best Short Antenna for Tundra? In our article, we have reviewed the 10 best ones out there. No more going around in search of an antenna that doesn’t easily break looks good, and works great at the same time.

In our opinion, conspiring all the features and qualities, the AntennaMastsRus short antenna is the best pick out of the 10 given. That is because of its reliability, strength, car wash safety, and other features.


Leave a Reply

Your email address will not be published. Required fields are marked *